No. 10 Peel & Seal Envelope (4 1/8 x 9 1/2) (PID: 13357)

No. 10 Peel & Seal Envelope (4 1/8 x 9 1/2)
No. 10 Peel & Seal Envelope (4 1/8 x 9 1/2)
<< >>
No. 10 Peel & Seal Envelope (4 1/8 x 9 1/2)

A peel & seal envelope is an envelope that has an adhesive strip on the flap that can be moistened and sealed without the need for additional glue or tape. It allows the user to quickly and securely seal the envelope without any mess or hassle. They are commonly used for everyday mailings, such as personal letters, bills, and other documents.

To use a self-sealing envelope, the you simply need to remove the protective strip covering the adhesive and press the flap down onto the envelope. The adhesive strip will then seal the envelope securely, ensuring that the contents remain safe and protected during transit.

Since these are so widely used, it does not make sense to offer small quantities. People usually order 1000 (2 boxes) or one case (i.e. 2500). The more you order the cheaper (unit price) it gets. Almost 95% of time - the logo with return address is all that is printed on the left top corner.


Don't have artwork? No Problem!!

Check out our beautiful design templates 97 of them at Design Papa.

SIZE

Flat Size : No. 10 Envelope, 9.5 x 4.125 inch (width x height)
Artwork Size (No Bleeds allowed): 9.5x4.125 inch (width x height). Artwork should have 5/16" (0.3125") space on of the shorter side for grippers.
NOTE: 30% ink coverage maximum. We do not print heavy solid backgrounds.

NEED ONLY BLANK ENVELOPES?

Don't need any printing but need blank envelopes, then visit Market Place. Click here.

ARTWORK

FREE Typesetting your address. Just provide us with the logo file and we do the rest. If providing artwork for 1 or 2 color jobs then we will need color seperated artwork for PMS printing. Refer to our Knowledge base or contact our customer service.

THINGS TO KNOW WHEN PRINTING ON FINISHED ENVELOPES

We always print on finished envelope. This allows us to offer the lowest prices but does have some limitation when printing in full color. These are listed below:

1. Color Matching: It is very hard or sometimes impossible to match colors. For matching colors we need to be able to print a color control bar on the printed piece and then it is scanned by a spectrophotometer which checks for the color density and automatically controls the inking system on the press. Now since we are printing on a finished envelope, we do not have any space to print the color bar, and hence the ink adjustment has to be eye balled by our press operators. Now our press operators are good and usually can do a fantastic job, but due to this limitation we cannot guarantee color match with other printed stationary product like company letterheads, business cards or even previously printed samples.

2. Printing to the Edge of the Envelope or Full Bleed: Since we are printing on finished envelope, there is a margin all around which cannot be printed, very similar to your home printer. To be able to print full bleed we have to print on bigger sheets of paper and then cut down to the size.

3. Avoid Heavy Ink Coverage on the Seams: If you inspect any envelope closely you will notice that at various position of the envelopes there are multiple layers of paper. For e.g. on the seams there are 3 layers of paper and then it becomes 2 layers. Now due to this varying thickness, the press cannot lay down the ink evenly, and hence the place where there are 3 layers will be more darker then then the place where there are 2 and hence the discoloration. So try to avoid heavy ink coverage on the seams.

If your envelope needs color accuracy then please request for a custom quote or give us a call and explain us what you are looking for.

WHICH COLOR OPTION TO CHOOSE?

Black Ink Impriting: The most economical way to imprint your envelope with your company information. If you have a really low budget and deciding between getting blank envelope or a printed one then choose the Blank Ink Imprinting. Simple, Cheap and looks good.

1 Color Imprinting: Most of the logos in the world, if you think of are 1 color. For e.g. the Intel Blue, Coco Cola Red etc. So if your logo is based on a a PMS color, then we can print using that color.

2 Color Imprinting: we will imprinting using 2 Pantone Colors. All we will need is a proper color seperated artwork and the Pantone Color Codes.

Full Color (CMYK) Imprinting: With the digital age, lot of logos now days have lots of color and it is not cost effective to print them using the Pantone Color system, so we print using Full Color CMYK process colors.

We are also able to print on the flap of the envelope. So you can choose the appropriate option.

PRINTING WITH PMS/PANTONE/SPOT COLORS

WHAT IS PMS?
PMS stands for Pantone Matching System, and is a standardized color reproduction system. Similar to the paint swatch guides you find at your favorite paint store, the pantone color chart contains thousands of color swatches created from a palette of basic colors. Color is very subjective, which is why the PMS works so well. It takes all the guesswork out of color identification. Every computer monitor is different, every printer is different. By standardizing the colors, manufacturers and customers in different locations can all refer to the Pantone system to make sure colors match. Creating a Pantone spot color is similar to mixing paint such as blue and yellow to get green, but with much more precision. Each color has a 'PMS' number assigned to it. These numbers are used to identify the exact color needed. The specified ink is then prepared using the correct mixture of base colors, either purchased pre-mixed from an ink company or mixed on-site at the printing company. Using PMS inks is called spot color printing..

CMYK (or Full Color) vs PMS?
When preparing an image for printing in CMYK, the electronic file is separated into four primary colors: cyan, magenta, yellow and black. The image is recreated using screen tints made up of small dots that are applied at different angles to the four process colors. The separated color images are then transferred to four different printing plates on the press. The colors are then printed one after the other to recreate the original image. The CMYK colors are manufactured colors and are not mixed by the end user. This method can be referred to as 4 color, full-color or standard process printing.

WHEN TO USE PMS?
a. Consistent Branding - Think Coco Cola red or Intel Blue. Using PMS colors for your logo and stationery will allow you to ensure color accuracy and establish a standard that anyone working with your artwork will be able to match.
b. Colors outside the range of CMYK - There are some colors that just can't be produced with CMYK, including colors such as reflex blue, navy blue or bright orange.
c. Color consistency from page to page - If you are printing stationary like letterheads and envelopes or business cards then it might be worth using Pantone. When printing a solid color with process inks, slight variations in the color balance can affect the consistency of the color.
d. Smooth coverage of large areas - A PMS color works well when the consistency and saturation of large areas of a solid ink color is importantIt is used by many printers and graphic artists to deliver reliable, reproducible colors to their customers.

WHY PMS IS NOT ALWAYS THE COST EFFECTIVE OPTION?
Even though PMS is a great option in certain cases, it doesn't always make sense to incorporate it into your printing project. Using spot colors can be more expensive than process inks due to the extra production costs involved in "washing up" and changing out the ink in the press, particularly when using more than one or two PMS colors depending on the printer's manufacturing equipment and processes. Since CMYK process printing uses the same base colors all the time, it's a more cost-effective solution.

PRODUCTION TIME

Regular is 4 days. For a small rush fee you can select 3 Day, 2 Day and Next Business Day options.

OUR GUARANTEE

Check out our No Hassle 100% Satisfaction Guarantee Policy.


Instant Calculator

Select Product

1. Envelope Type  Help

No.10 Self Sealing (4.125x9.5)

2. Printed Sides/Color  Help

3. Artwork  Help

4. Proofing  Help

5. Turnaround Time (View Calendar) 

Job Name:

PMS Color Name or Number(s):

Estimated Completion Date:

Estimate Shipping Cost and Delivery Date
Price as Configured:
Shipping:(In-Store Pickup)  
Sub Total:  
Unit Price:
QUANTITY:

What would you like to do?

BetaUpload File and continue

Upload Your File

or

Design Online

Design Online

Design Online

Design Online

Design Online Not Available Open this page in Desktop or Tablet to design online.

Artwork not ready?

Add To Cart (Upload file later)

Add To Cart (Upload file later)

Add To Cart

Add To Cart


Prefer to order by phone

Prefer to order by phone

Call 408-567-9553| 8:30a.m to 5:30p.m (PT)


Share Product Configuration

Generate a link with the current product configuration you have on the screen?

DETAILS

A peel & seal envelope is an envelope that has an adhesive strip on the flap that can be moistened and sealed without the need for additional glue or tape. It allows the user to quickly and securely seal the envelope without any mess or hassle. They are commonly used for everyday mailings, such as personal letters, bills, and other documents.

To use a self-sealing envelope, the you simply need to remove the protective strip covering the adhesive and press the flap down onto the envelope. The adhesive strip will then seal the envelope securely, ensuring that the contents remain safe and protected during transit.

Since these are so widely used, it does not make sense to offer small quantities. People usually order 1000 (2 boxes) or one case (i.e. 2500). The more you order the cheaper (unit price) it gets. Almost 95% of time - the logo with return address is all that is printed on the left top corner.


Don't have artwork? No Problem!!

Check out our beautiful design templates 97 of them at Design Papa.

SIZE

Flat Size : No. 10 Envelope, 9.5 x 4.125 inch (width x height)
Artwork Size (No Bleeds allowed): 9.5x4.125 inch (width x height). Artwork should have 5/16" (0.3125") space on of the shorter side for grippers.
NOTE: 30% ink coverage maximum. We do not print heavy solid backgrounds.

NEED ONLY BLANK ENVELOPES?

Don't need any printing but need blank envelopes, then visit Market Place. Click here.

ARTWORK

FREE Typesetting your address. Just provide us with the logo file and we do the rest. If providing artwork for 1 or 2 color jobs then we will need color seperated artwork for PMS printing. Refer to our Knowledge base or contact our customer service.

THINGS TO KNOW WHEN PRINTING ON FINISHED ENVELOPES

We always print on finished envelope. This allows us to offer the lowest prices but does have some limitation when printing in full color. These are listed below:

1. Color Matching: It is very hard or sometimes impossible to match colors. For matching colors we need to be able to print a color control bar on the printed piece and then it is scanned by a spectrophotometer which checks for the color density and automatically controls the inking system on the press. Now since we are printing on a finished envelope, we do not have any space to print the color bar, and hence the ink adjustment has to be eye balled by our press operators. Now our press operators are good and usually can do a fantastic job, but due to this limitation we cannot guarantee color match with other printed stationary product like company letterheads, business cards or even previously printed samples.

2. Printing to the Edge of the Envelope or Full Bleed: Since we are printing on finished envelope, there is a margin all around which cannot be printed, very similar to your home printer. To be able to print full bleed we have to print on bigger sheets of paper and then cut down to the size.

3. Avoid Heavy Ink Coverage on the Seams: If you inspect any envelope closely you will notice that at various position of the envelopes there are multiple layers of paper. For e.g. on the seams there are 3 layers of paper and then it becomes 2 layers. Now due to this varying thickness, the press cannot lay down the ink evenly, and hence the place where there are 3 layers will be more darker then then the place where there are 2 and hence the discoloration. So try to avoid heavy ink coverage on the seams.

If your envelope needs color accuracy then please request for a custom quote or give us a call and explain us what you are looking for.

WHICH COLOR OPTION TO CHOOSE?

Black Ink Impriting: The most economical way to imprint your envelope with your company information. If you have a really low budget and deciding between getting blank envelope or a printed one then choose the Blank Ink Imprinting. Simple, Cheap and looks good.

1 Color Imprinting: Most of the logos in the world, if you think of are 1 color. For e.g. the Intel Blue, Coco Cola Red etc. So if your logo is based on a a PMS color, then we can print using that color.

2 Color Imprinting: we will imprinting using 2 Pantone Colors. All we will need is a proper color seperated artwork and the Pantone Color Codes.

Full Color (CMYK) Imprinting: With the digital age, lot of logos now days have lots of color and it is not cost effective to print them using the Pantone Color system, so we print using Full Color CMYK process colors.

We are also able to print on the flap of the envelope. So you can choose the appropriate option.

PRINTING WITH PMS/PANTONE/SPOT COLORS

WHAT IS PMS?
PMS stands for Pantone Matching System, and is a standardized color reproduction system. Similar to the paint swatch guides you find at your favorite paint store, the pantone color chart contains thousands of color swatches created from a palette of basic colors. Color is very subjective, which is why the PMS works so well. It takes all the guesswork out of color identification. Every computer monitor is different, every printer is different. By standardizing the colors, manufacturers and customers in different locations can all refer to the Pantone system to make sure colors match. Creating a Pantone spot color is similar to mixing paint such as blue and yellow to get green, but with much more precision. Each color has a 'PMS' number assigned to it. These numbers are used to identify the exact color needed. The specified ink is then prepared using the correct mixture of base colors, either purchased pre-mixed from an ink company or mixed on-site at the printing company. Using PMS inks is called spot color printing..

CMYK (or Full Color) vs PMS?
When preparing an image for printing in CMYK, the electronic file is separated into four primary colors: cyan, magenta, yellow and black. The image is recreated using screen tints made up of small dots that are applied at different angles to the four process colors. The separated color images are then transferred to four different printing plates on the press. The colors are then printed one after the other to recreate the original image. The CMYK colors are manufactured colors and are not mixed by the end user. This method can be referred to as 4 color, full-color or standard process printing.

WHEN TO USE PMS?
a. Consistent Branding - Think Coco Cola red or Intel Blue. Using PMS colors for your logo and stationery will allow you to ensure color accuracy and establish a standard that anyone working with your artwork will be able to match.
b. Colors outside the range of CMYK - There are some colors that just can't be produced with CMYK, including colors such as reflex blue, navy blue or bright orange.
c. Color consistency from page to page - If you are printing stationary like letterheads and envelopes or business cards then it might be worth using Pantone. When printing a solid color with process inks, slight variations in the color balance can affect the consistency of the color.
d. Smooth coverage of large areas - A PMS color works well when the consistency and saturation of large areas of a solid ink color is importantIt is used by many printers and graphic artists to deliver reliable, reproducible colors to their customers.

WHY PMS IS NOT ALWAYS THE COST EFFECTIVE OPTION?
Even though PMS is a great option in certain cases, it doesn't always make sense to incorporate it into your printing project. Using spot colors can be more expensive than process inks due to the extra production costs involved in "washing up" and changing out the ink in the press, particularly when using more than one or two PMS colors depending on the printer's manufacturing equipment and processes. Since CMYK process printing uses the same base colors all the time, it's a more cost-effective solution.

PRODUCTION TIME

Regular is 4 days. For a small rush fee you can select 3 Day, 2 Day and Next Business Day options.

OUR GUARANTEE

Check out our No Hassle 100% Satisfaction Guarantee Policy.

TEMPLATE (2)
FAQ
RELATED (12)

@@PageLoadedSuccessfully
Payment Methods
Free Sample Kit
Check out Printpapa on Yelp
Session Expired Warning
Due to inactivity, your session has expired. Please login again to continue.