13oz. Standard Vinyl Banner (PID: 20126)

Height:12 inch to 60 inch (1 inch increment)
Width: 12 inch to 25 feet (1 inch increment)

Choose from 13 oz Scrim Vinyl Banner (matte finish) or 13 oz Blockout Vinyl Banner (matte finish). We use ECO-SOL MAX INK for full color printed banners. The ink comes with 3 years of outdoor-exposure guarantee without lamination.

Pole pockets are used on some specific banner installations. The purpose of the pocket is to slide the banner over a pole. The bottom pocket is used to weigh down and add some tension to the banner. That way the creases can be reduced and a solid tensioned appearance can be achieved.

Pole pockets come with 2 inches, 3 inches, or 4 inches of material wrapped around the top, the bottom of the banner. The material of the vinyl banner gets folded on the back of the banner like hems. But it creates a pocket through which you can insert a pole.

How to set artwork for a banner with pole pockets?

The diagram below shows pole pocket allowance for a banner with 2" pockets top and bottom.

A 3" clear area is needed at the top and the bottom of the artwork. This allows 2" for the pocket and 1" for the tape. No critical text, logos, and graphics should enter this area. Background color and images are fine to enter the pocket area.

What size should your pole pocket be?

The size of these pockets will depend on the diameter of the pole being used to insert. We have shown an easy way to calculate your flat pocket size:

Pole Pocket Flat Measure	Diameter of Pole
2"	1/2"
3"	1.25"
4"	1.5"

Ordering your banner

When entering your banner size and choosing the pole pocket option, please ensure your banner height is the total height including the pockets.

Creating banner artwork with pole pockets

When creating your artwork please leave the clear area where your pocket will be placed. Please make sure that no critical text, logos, or important information is within the pocket area.

Print Ready PDF, OR Simple Text Setup, OR Full Color Design. You Choose! We do it.

Our default option is to reinforce the edges and to apply grommets every 2 feet. We also offer the option of trimming the edges of the banner only. You can also choose to apply Grommets along with the Rope Inserts.

Standard Turnaround is 5 Days. We offer 3 Days, 2 Days, Next Day & Same Day Rush service for additional fee. If you are not in a rush then please choose the 5 Day Turnaround, that way we can keep the prices low and still offer a high level of service.

Check out our No Hassle 100% Satisfaction Guarantee Policy