Transfer Stickers (UV DTF) (PID: 26140)

UV DTF Transfers Stickers - the newest way to turn any surface into a high-impact branding moment. Made with advanced UV printing technology, these transfers deliver ultra-gloss shine, vibrant color, permanent adhesion and unmatched durability - all with a simple peel-and-stick application. No heat press. No special equipment. Just perfect results every time.

Designed for creators, small businesses, and product makers, UV DTF transfers adhere to glass, plastic, metal, ceramic, packaging, tumblers, bottles, laptops, and more. This is the fastest and easiest way to achieve a professional, waterproof, scratch-resistant finish.

Key Benefits
1. Ready to Apply - No heat press required. Peel, stick, and you're done.
2. Ultra-Gloss Finish - Luxurious shine that elevates any item.
3. Vibrant, Fade-Resistant Color - Printed using UV-curable inks for long-lasting brightness.
4. Permanent Adhesion - Sticks to almost any smooth surface and impossible to remove. Adhesion is permanent
5. Waterproof & Scratch-Proof - Made for daily wear and tear.
6. Perfect for Branding - Ideal for logos, labels, product packaging, and custom gifts.
7. DIY Friendly - Easy application for beginners and professionals alike.

ARTWORK INSTRUCTIONS

Single Design		Multiple Design (Gang Sheet)
File type: PNG Only File must be transparent background Require ⅛" safety margin along all edges to avoid print cut off in trimming Max size: 15in Width x 15in Height Transfers will be trimmed to ordered size		File type: PNG Only File must be transparent background Require ⅛" safety margin along all edges to avoid print cut off in trimming Gang up designs on your artboard to utilize the square footage price. 3 Designs ganged up as shown above. The border is there just for representation but should not be present in actual print. Max size: 22in Width x 10ft Height Transfers will be trimmed to ordered size

PRESSING INSTRUCTIONS

Prepare the Surface - Clean and dry the surface completely before applying the label.

Remove the Back Protective Carrier Sheet - Carefully peel off the back liner to expose the adhesive.

Position the Label - Align the label on the desired area. Once adhesion begins, repositioning may not be possible without damaging the label or surface.

Apply the Label - Starting from the center, apply firm, even pressure outward to remove air bubbles. Use a squeegee or soft cloth to smooth the label and ensure full contact.

After Application - Allow at least 24 hours for the adhesive to cure fully before exposing to moisture, friction, or handling.

Click here to download the full guide.

MATERIAL

UV DTF Film with white carrier sheet.

PRODUCTION TIME

Regular is 3 Days. We offer 2 day service, Next Day rush service for additional fee.

OUR GUARANTEE

Check out our No Hassle 100% Satisfaction Guarantee Policy. We do not provide Installation Service.