Pole pockets consist of either 2 inches or 4 inches of material wrapped around the sides, top or bottom of the banner. The vinyl banner material is folded over the backside of the banner similar to hems, but there is room for a pole or rod to go through the pocket. The material is heat welded onto the backside of the banner which creates a smooth 2 inch or 4 inch seam.
Single Sided Banner: The pole pockets are finished at the size dimensions of the banner size selected - not in addition.
Double Sided Banner: There will be a 1 inch white border on the sides which have the Pole Pockets. This 1 inch edge is for hemming and making the pole pocket. Please setup the art as per the dimension you have chosen. Refer to the Guideline template for Double Sided Pole Pocket Banners for further information
Height:1 ft to 5 ft. (1 inch increment)
Width: 1 ft to 25 ft. (1 inch increment)
PLEASE NOTE: There are two ways to figure out the pole pocket sizes:
1. The diameter of the pole over which the pocket will fit, or
2. The flat-measure size of the pocket from the edge of the material to the bottom of the seam.
We offer 2" & 4" Flat-Pocket Measure.
|Pole Pocket Size |
|Pole Pocket Flat Measure ||Diameter of Pole |
|2" ||1/2" |
|4" ||1.5" | DESIGN SERVICE
For Single Sided Banner we use the 13 oz Scrim Vinyl Banner - Matte finish, with white background. For 2 sided Banner we use the 13oz Block out vinyl. All our banners are printed in full color using ECO-SOL MAX INK. The ink lasts up to 3 years outdoors without lamination
GROMMETS & FINISHING
Print Ready PDF, OR Simple Text Setup, OR Full Color Design. You Choose! We do it.
Please note: The Grommet will be applied to the Pocket Hem Area.
Standard Turnaround is 3 Days. We offer Rush service for additional fee.