Mesh Banner (PID: 20453)

Mesh Banner
<< >>
Mesh Banner

Mesh banners are a perfect choice for windy locations rather than banners with slits which might tear them. The polyester material that mesh banners are made up of allows the wind to pass through easily. Although they have criss-cross fibres that make you see through, mesh certainly has a good printable surface.

SIZE

Height:12 inch to 61 inch (1 inch increment)
Width: 12 inch to 50 feet (1 inch increment)

MATERIAL

MESH Banner is a reinforced banner material manufactured with polyester support cloth and coated with PVC. It is engineered to achieve approximately 25% air-flow through while maintaining excellent printability.

POLE POCKET OPTION

Pole pockets are used on some specific banner installations. The purpose of the pocket is to slide the banner over a pole. The bottom pocket is used to weigh down and add some tension to the banner. That way the creases can be reduced and a solid tensioned appearance can be achieved.

Pole pockets come with 2 inches, 3 inches, or 4 inches of material wrapped around the top, the bottom of the banner. The material of the vinyl banner gets folded on the back of the banner like hems. But it creates a pocket through which you can insert a pole.

How to set artwork for a banner with pole pockets?

The diagram below shows pole pocket allowance for a banner with 2" pockets top and bottom.

A 3" clear area is needed at the top and the bottom of the artwork. This allows 2" for the pocket and 1" for the tape. No critical text, logos, and graphics should enter this area. Background color and images are fine to enter the pocket area.



What size should your pole pocket be?

The size of these pockets will depend on the diameter of the pole being used to insert. We have shown an easy way to calculate your flat pocket size:



Pole Pocket Flat Measure Diameter of Pole
2" 1/2"
3" 1.25"
4" 1.5"


Ordering your banner

When entering your banner size and choosing the pole pocket option, please ensure your banner height is the total height including the pockets.

Creating banner artwork with pole pockets

When creating your artwork please leave the clear area where your pocket will be placed. Please make sure that no critical text, logos, or important information is within the pocket area.

DESIGN SERVICE

Print Ready PDF, OR Simple Text Setup, OR Full Color Design. You Choose! We do it.

GROMMETS & FINISHING

Our default option is to reinforce the edges and to apply grommets every 2 feet. We also offer the option of trimming the edges of the banner only. You can also choose to apply Grommets along with the Rope Inserts.

PRODUCTION TIME

Standard Turnaround is 5 Days. We offer 3 Days, 2 Days, Next Day & Same Day Rush service for additional fee. If you are not in a rush then please choose the 5 Day Turnaround, that way we can keep the prices low and still offer a high level of service.

OUR GUARANTEE

Check out our No Hassle 100% Satisfaction Guarantee Policy


Instant Calculator

Select Product

1. Select Size 

2. Printed Sides/Color  Help

1 Side Only (4/0)

3. Material  Help

8 oz Mesh Banner
4. Banner Finishing Options
+
Edge reinforcement, Grommets and Rope inserts.

a. Edge Reinforcement  Help

b. Grommets  Help

c. Pole Pockets Options  Help

d. Rope Insert  Help

5. Artwork  Help

6. Proofing  Help

7. Turnaround Time (View Calendar) 

Size (Width x Height):

Job Name:

Estimated Completion Date:

Estimate Shipping Cost and Delivery Date
Price as Configured:
Shipping:(In-Store Pickup)  
Sub Total:  
Unit Price:
QUANTITY: Add to cart and continue Add to cart and continue
Prefer to order by phone

Prefer to order by phone

Call 408-567-9553| 8:30a.m to 5:30p.m (PT)


Share Product Configuration

Generate a link with the current product configuration you have on the screen?

DETAILS

Mesh banners are a perfect choice for windy locations rather than banners with slits which might tear them. The polyester material that mesh banners are made up of allows the wind to pass through easily. Although they have criss-cross fibres that make you see through, mesh certainly has a good printable surface.

SIZE

Height:12 inch to 61 inch (1 inch increment)
Width: 12 inch to 50 feet (1 inch increment)

MATERIAL

MESH Banner is a reinforced banner material manufactured with polyester support cloth and coated with PVC. It is engineered to achieve approximately 25% air-flow through while maintaining excellent printability.

POLE POCKET OPTION

Pole pockets are used on some specific banner installations. The purpose of the pocket is to slide the banner over a pole. The bottom pocket is used to weigh down and add some tension to the banner. That way the creases can be reduced and a solid tensioned appearance can be achieved.

Pole pockets come with 2 inches, 3 inches, or 4 inches of material wrapped around the top, the bottom of the banner. The material of the vinyl banner gets folded on the back of the banner like hems. But it creates a pocket through which you can insert a pole.

How to set artwork for a banner with pole pockets?

The diagram below shows pole pocket allowance for a banner with 2" pockets top and bottom.

A 3" clear area is needed at the top and the bottom of the artwork. This allows 2" for the pocket and 1" for the tape. No critical text, logos, and graphics should enter this area. Background color and images are fine to enter the pocket area.



What size should your pole pocket be?

The size of these pockets will depend on the diameter of the pole being used to insert. We have shown an easy way to calculate your flat pocket size:



Pole Pocket Flat Measure Diameter of Pole
2" 1/2"
3" 1.25"
4" 1.5"


Ordering your banner

When entering your banner size and choosing the pole pocket option, please ensure your banner height is the total height including the pockets.

Creating banner artwork with pole pockets

When creating your artwork please leave the clear area where your pocket will be placed. Please make sure that no critical text, logos, or important information is within the pocket area.

DESIGN SERVICE

Print Ready PDF, OR Simple Text Setup, OR Full Color Design. You Choose! We do it.

GROMMETS & FINISHING

Our default option is to reinforce the edges and to apply grommets every 2 feet. We also offer the option of trimming the edges of the banner only. You can also choose to apply Grommets along with the Rope Inserts.

PRODUCTION TIME

Standard Turnaround is 5 Days. We offer 3 Days, 2 Days, Next Day & Same Day Rush service for additional fee. If you are not in a rush then please choose the 5 Day Turnaround, that way we can keep the prices low and still offer a high level of service.

OUR GUARANTEE

Check out our No Hassle 100% Satisfaction Guarantee Policy

TEMPLATE (4)
FAQ
RELATED (7)

@@PageLoadedSuccessfully
Session Expired Warning
Due to inactivity, your session has expired. Please login again to continue.